dmesg - 4ghz oc
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Linux version 3.8.0-35-generic (buildd@allspice) (gcc version 4.6.3 (Ubuntu/Linaro 4.6.3-1ubuntu5) ) #50~precise1-Ubuntu SMP Wed Dec 4 17:25:51 UTC 2013 (Ubuntu 3.8.0-35.50~precise1-generic 3.8.13.13)
[ 0.000000] KERNEL supported cpus:
[ 0.000000] Intel GenuineIntel
[ 0.000000] AMD AuthenticAMD
[ 0.000000] Centaur CentaurHauls
[ 0.000000] e820: BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009e7ff] usable
[ 0.000000] BIOS-e820: [mem 0x000000000009f800-0x000000000009ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000000f0000-0x00000000000fffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000cfeaffff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000cfeb0000-0x00000000cfee1fff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x00000000cfee2000-0x00000000cfeeffff] ACPI data
[ 0.000000] BIOS-e820: [mem 0x00000000cfef0000-0x00000000cfefffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000e0000000-0x00000000e3ffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000ffffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000022fffffff] usable
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] SMBIOS 2.4 present.
[ 0.000000] DMI: Gigabyte Technology Co., Ltd. EP45-UD3P/EP45-UD3P, BIOS FB 05/20/2009
[ 0.000000] e820: update [mem 0x00000000-0x0000ffff] usable ==> reserved
[ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[ 0.000000] No AGP bridge found
[ 0.000000] e820: last_pfn = 0x230000 max_arch_pfn = 0x400000000
[ 0.000000] MTRR default type: uncachable
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-BFFFF uncachable
[ 0.000000] C0000-CFFFF write-protect
[ 0.000000] D0000-EFFFF uncachable
[ 0.000000] F0000-FFFFF write-through
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 000000000 mask F00000000 write-back
[ 0.000000] 1 base 0E0000000 mask FE0000000 uncachable
[ 0.000000] 2 base 0D0000000 mask FF0000000 uncachable
[ 0.000000] 3 base 100000000 mask F00000000 write-back
[ 0.000000] 4 base 200000000 mask FC0000000 write-back
[ 0.000000] 5 base 230000000 mask FF0000000 uncachable
[ 0.000000] 6 base 0CFF00000 mask FFFF00000 uncachable
[ 0.000000] 7 disabled
[ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[ 0.000000] original variable MTRRs
[ 0.000000] reg 0, base: 0GB, range: 4GB, type WB
[ 0.000000] reg 1, base: 3584MB, range: 512MB, type UC
[ 0.000000] reg 2, base: 3328MB, range: 256MB, type UC
[ 0.000000] reg 3, base: 4GB, range: 4GB, type WB
[ 0.000000] reg 4, base: 8GB, range: 1GB, type WB
[ 0.000000] reg 5, base: 8960MB, range: 256MB, type UC
[ 0.000000] reg 6, base: 3327MB, range: 1MB, type UC
[ 0.000000] total RAM covered: 8191M
[ 0.000000] Found optimal setting for mtrr clean up
[ 0.000000] gran_size: 64K chunk_size: 2M num_reg: 7 lose cover RAM: 0G
[ 0.000000] New variable MTRRs
[ 0.000000] reg 0, base: 0GB, range: 2GB, type WB
[ 0.000000] reg 1, base: 2GB, range: 1GB, type WB
[ 0.000000] reg 2, base: 3GB, range: 256MB, type WB
[ 0.000000] reg 3, base: 3327MB, range: 1MB, type UC
[ 0.000000] reg 4, base: 4GB, range: 4GB, type WB
[ 0.000000] reg 5, base: 8GB, range: 512MB, type WB
[ 0.000000] reg 6, base: 8704MB, range: 256MB, type WB
[ 0.000000] e820: update [mem 0xcff00000-0xffffffff] usable ==> reserved
[ 0.000000] e820: last_pfn = 0xcfeb0 max_arch_pfn = 0x400000000
[ 0.000000] found SMP MP-table at [mem 0x000f57d0-0x000f57df] mapped at [ffff8800000f57d0]
[ 0.000000] initial memory mapped: [mem 0x00000000-0x1fffffff]
[ 0.000000] Base memory trampoline at [ffff880000098000] 98000 size 24576
[ 0.000000] init_memory_mapping: [mem 0x00000000-0xcfeaffff]
[ 0.000000] [mem 0x00000000-0xcfdfffff] page 2M
[ 0.000000] [mem 0xcfe00000-0xcfeaffff] page 4k
[ 0.000000] kernel direct mapping tables up to 0xcfeaffff @ [mem 0x1fffa000-0x1fffffff]
[ 0.000000] init_memory_mapping: [mem 0x100000000-0x22fffffff]
[ 0.000000] [mem 0x100000000-0x22fffffff] page 2M
[ 0.000000] kernel direct mapping tables up to 0x22fffffff @ [mem 0xcfeaa000-0xcfeaffff]
[ 0.000000] RAMDISK: [mem 0x35454000-0x36a21fff]
[ 0.000000] ACPI: RSDP 00000000000f7600 00014 (v00 GBT )
[ 0.000000] ACPI: RSDT 00000000cfee2040 0003C (v01 GBT GBTUACPI 42302E31 GBTU 01010101)
[ 0.000000] ACPI: FACP 00000000cfee20c0 00074 (v01 GBT GBTUACPI 42302E31 GBTU 01010101)
[ 0.000000] ACPI: DSDT 00000000cfee2180 050A9 (v01 GBT GBTUACPI 00001000 MSFT 0100000C)
[ 0.000000] ACPI: FACS 00000000cfeb0000 00040
[ 0.000000] ACPI: HPET 00000000cfee7380 00038 (v01 GBT GBTUACPI 42302E31 GBTU 00000098)
[ 0.000000] ACPI: MCFG 00000000cfee7400 0003C (v01 GBT GBTUACPI 42302E31 GBTU 01010101)
[ 0.000000] ACPI: EUDS 00000000cfee74c0 00500 (v01 GBT 00000000 00000000)
[ 0.000000] ACPI: TAMG 00000000cfee79c0 06852 (v01 GBT GBT B0 5455312E BG?? 00020101)
[ 0.000000] ACPI: APIC 00000000cfee7280 00084 (v01 GBT GBTUACPI 42302E31 GBTU 01010101)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] No NUMA configuration found
[ 0.000000] Faking a node at [mem 0x0000000000000000-0x000000022fffffff]
[ 0.000000] Initmem setup node 0 [mem 0x00000000-0x22fffffff]
[ 0.000000] NODE_DATA [mem 0x22fffb000-0x22fffffff]
[ 0.000000] [ffffea0000000000-ffffea0008bfffff] PMD -> [ffff880227600000-ffff88022f5fffff] on node 0
[ 0.000000] Zone ranges:
[ 0.000000] DMA [mem 0x00010000-0x00ffffff]
[ 0.000000] DMA32 [mem 0x01000000-0xffffffff]
[ 0.000000] Normal [mem 0x100000000-0x22fffffff]
[ 0.000000] Movable zone start for each node
[ 0.000000] Early memory node ranges
[ 0.000000] node 0: [mem 0x00010000-0x0009dfff]
[ 0.000000] node 0: [mem 0x00100000-0xcfeaffff]
[ 0.000000] node 0: [mem 0x100000000-0x22fffffff]
[ 0.000000] On node 0 totalpages: 2096702
[ 0.000000] DMA zone: 64 pages used for memmap
[ 0.000000] DMA zone: 6 pages reserved
[ 0.000000] DMA zone: 3912 pages, LIFO batch:0
[ 0.000000] DMA32 zone: 13243 pages used for memmap
[ 0.000000] DMA32 zone: 834293 pages, LIFO batch:31
[ 0.000000] Normal zone: 19456 pages used for memmap
[ 0.000000] Normal zone: 1225728 pages, LIFO batch:31
[ 0.000000] ACPI: PM-Timer IO Port: 0x408
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x03] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x02] enabled)
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] dfl dfl lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] dfl dfl lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x02] dfl dfl lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x03] dfl dfl lint[0x1])
[ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ2 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000
[ 0.000000] smpboot: Allowing 4 CPUs, 0 hotplug CPUs
[ 0.000000] nr_irqs_gsi: 40
[ 0.000000] PM: Registered nosave memory: 000000000009e000 - 00000000000a0000
[ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000f0000
[ 0.000000] PM: Registered nosave memory: 00000000000f0000 - 0000000000100000
[ 0.000000] PM: Registered nosave memory: 00000000cfeb0000 - 00000000cfee2000
[ 0.000000] PM: Registered nosave memory: 00000000cfee2000 - 00000000cfef0000
[ 0.000000] PM: Registered nosave memory: 00000000cfef0000 - 00000000cff00000
[ 0.000000] PM: Registered nosave memory: 00000000cff00000 - 00000000e0000000
[ 0.000000] PM: Registered nosave memory: 00000000e0000000 - 00000000e4000000
[ 0.000000] PM: Registered nosave memory: 00000000e4000000 - 00000000fec00000
[ 0.000000] PM: Registered nosave memory: 00000000fec00000 - 0000000100000000
[ 0.000000] e820: [mem 0xe4000000-0xfebfffff] available for PCI devices
[ 0.000000] Booting paravirtualized kernel on bare hardware
[ 0.000000] setup_percpu: NR_CPUS:256 nr_cpumask_bits:256 nr_cpu_ids:4 nr_node_ids:1
[ 0.000000] PERCPU: Embedded 28 pages/cpu @ffff88022fc00000 s84928 r8192 d21568 u524288
[ 0.000000] pcpu-alloc: s84928 r8192 d21568 u524288 alloc=1*2097152
[ 0.000000] pcpu-alloc: [0] 0 1 2 3
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 2063933
[ 0.000000] Policy zone: Normal
[ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[ 0.000000] __ex_table already sorted, skipping sort
[ 0.000000] xsave: enabled xstate_bv 0x3, cntxt size 0x240
[ 0.000000] Checking aperture...
[ 0.000000] No AGP bridge found
[ 0.000000] Calgary: detecting Calgary via BIOS EBDA area
[ 0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
[ 0.000000] Memory: 8151040k/9175040k available (7176k kernel code, 788232k absent, 235768k reserved, 6067k data, 1016k init)
[ 0.000000] SLUB: Genslabs=15, HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[ 0.000000] Hierarchical RCU implementation.
[ 0.000000] RCU dyntick-idle grace-period acceleration is enabled.
[ 0.000000] RCU restricting CPUs from NR_CPUS=256 to nr_cpu_ids=4.
[ 0.000000] NR_IRQS:16640 nr_irqs:712 16
[ 0.000000] Console: colour VGA+ 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] allocated 33554432 bytes of page_cgroup
[ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
[ 0.000000] hpet clockevent registered
[ 0.000000] tsc: Fast TSC calibration using PIT
[ 0.000000] tsc: Detected 4011.720 MHz processor
[ 0.004002] Calibrating delay loop (skipped), value calculated using timer frequency.. 8023.44 BogoMIPS (lpj=16046880)
[ 0.004005] pid_max: default: 32768 minimum: 301
[ 0.004023] Security Framework initialized
[ 0.004033] AppArmor: AppArmor initialized
[ 0.004034] Yama: becoming mindful.
[ 0.004426] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes)
[ 0.009311] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes)
[ 0.010422] Mount-cache hash table entries: 256
[ 0.010564] Initializing cgroup subsys cpuacct
[ 0.010566] Initializing cgroup subsys memory
[ 0.010572] Initializing cgroup subsys devices
[ 0.010573] Initializing cgroup subsys freezer
[ 0.010574] Initializing cgroup subsys blkio
[ 0.010576] Initializing cgroup subsys perf_event
[ 0.010577] Initializing cgroup subsys hugetlb
[ 0.010597] CPU: Physical Processor ID: 0
[ 0.010598] CPU: Processor Core ID: 0
[ 0.010599] mce: CPU supports 6 MCE banks
[ 0.010605] CPU0: Thermal monitoring enabled (TM2)
[ 0.010608] process: using mwait in idle threads
[ 0.010610] Last level iTLB entries: 4KB 128, 2MB 4, 4MB 4
[ 0.010610] Last level dTLB entries: 4KB 256, 2MB 0, 4MB 32
[ 0.010610] tlb_flushall_shift: -1
[ 0.010684] Freeing SMP alternatives: 24k freed
[ 0.012354] ACPI: Core revision 20121018
[ 0.016007] ftrace: allocating 29399 entries in 115 pages
[ 0.024395] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.067749] smpboot: CPU0: Intel(R) Core(TM)2 Quad CPU Q9550 @ 2.83GHz (fam: 06, model: 17, stepping: 0a)
[ 0.068000] Performance Events: PEBS fmt0+, 4-deep LBR, Core2 events, Intel PMU driver.
[ 0.068000] ... version: 2
[ 0.068000] ... bit width: 40
[ 0.068000] ... generic registers: 2
[ 0.068000] ... value mask: 000000ffffffffff
[ 0.068000] ... max period: 000000007fffffff
[ 0.068000] ... fixed-purpose events: 3
[ 0.068000] ... event mask: 0000000700000003
[ 0.076077] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
[ 0.068000] smpboot: Booting Node 0, Processors #1 #2 #3 OK
[ 0.104005] Brought up 4 CPUs
[ 0.104008] smpboot: Total of 4 processors activated (32093.76 BogoMIPS)
[ 0.108059] devtmpfs: initialized
[ 0.108847] EVM: security.selinux
[ 0.108848] EVM: security.SMACK64
[ 0.108849] EVM: security.capability
[ 0.108857] PM: Registering ACPI NVS region [mem 0xcfeb0000-0xcfee1fff] (204800 bytes)
[ 0.108857] regulator-dummy: no parameters
[ 0.108857] NET: Registered protocol family 16
[ 0.108857] ACPI: bus type pci registered
[ 0.108857] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xe0000000-0xe3ffffff] (base 0xe0000000)
[ 0.108857] PCI: MMCONFIG at [mem 0xe0000000-0xe3ffffff] reserved in E820
[ 0.112986] PCI: Using configuration type 1 for base access
[ 0.113589] bio: create slab at 0
[ 0.113589] ACPI: Added _OSI(Module Device)
[ 0.113589] ACPI: Added _OSI(Processor Device)
[ 0.113589] ACPI: Added _OSI(3.0 _SCP Extensions)
[ 0.113589] ACPI: Added _OSI(Processor Aggregator Device)
[ 0.113589] ACPI: EC: Look up EC in DSDT
[ 0.114223] ACPI BIOS Bug: Warning: Incorrect checksum in table [TAMG] - 0xDD, should be 0xDC (20121018/tbutils-324)
[ 0.114299] ACPI: Interpreter enabled
[ 0.114301] ACPI: (supports S0 S1 S4 S5)
[ 0.114311] ACPI: Using IOAPIC for interrupt routing
[ 0.117982] ACPI: No dock devices found.
[ 0.117985] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[ 0.118010] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-3f])
[ 0.118012] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 0.118114] PCI host bridge to bus 0000:00
[ 0.118116] pci_bus 0000:00: root bus resource [bus 00-3f]
[ 0.118117] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7]
[ 0.118119] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff]
[ 0.118120] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
[ 0.118122] pci_bus 0000:00: root bus resource [mem 0x000c0000-0x000dffff]
[ 0.118123] pci_bus 0000:00: root bus resource [mem 0xfed40000-0xfed44fff]
[ 0.118124] pci_bus 0000:00: root bus resource [mem 0xcff00000-0xfebfffff]
[ 0.118130] pci 0000:00:00.0: [8086:2e20] type 00 class 0x060000
[ 0.118142] DMAR: Forcing write-buffer flush capability
[ 0.118142] DMAR: Disabling IOMMU for graphics on this chipset
[ 0.118156] pci 0000:00:01.0: [8086:2e21] type 01 class 0x060400
[ 0.118177] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
[ 0.118203] pci 0000:00:1a.0: [8086:3a37] type 00 class 0x0c0300
[ 0.118234] pci 0000:00:1a.0: reg 20: [io 0xe000-0xe01f]
[ 0.118270] pci 0000:00:1a.1: [8086:3a38] type 00 class 0x0c0300
[ 0.118301] pci 0000:00:1a.1: reg 20: [io 0xe100-0xe11f]
[ 0.118337] pci 0000:00:1a.2: [8086:3a39] type 00 class 0x0c0300
[ 0.118368] pci 0000:00:1a.2: reg 20: [io 0xe200-0xe21f]
[ 0.118409] pci 0000:00:1a.7: [8086:3a3c] type 00 class 0x0c0320
[ 0.118421] pci 0000:00:1a.7: reg 10: [mem 0xe8405000-0xe84053ff]
[ 0.118488] pci 0000:00:1b.0: [8086:3a3e] type 00 class 0x040300
[ 0.118498] pci 0000:00:1b.0: reg 10: [mem 0xe8400000-0xe8403fff 64bit]
[ 0.118545] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[ 0.118560] pci 0000:00:1c.0: [8086:3a40] type 01 class 0x060400
[ 0.118608] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[ 0.118625] pci 0000:00:1c.3: [8086:3a46] type 01 class 0x060400
[ 0.118673] pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold
[ 0.118688] pci 0000:00:1c.4: [8086:3a48] type 01 class 0x060400
[ 0.118736] pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold
[ 0.118752] pci 0000:00:1c.5: [8086:3a4a] type 01 class 0x060400
[ 0.118800] pci 0000:00:1c.5: PME# supported from D0 D3hot D3cold
[ 0.118817] pci 0000:00:1d.0: [8086:3a34] type 00 class 0x0c0300
[ 0.118848] pci 0000:00:1d.0: reg 20: [io 0xe300-0xe31f]
[ 0.118884] pci 0000:00:1d.1: [8086:3a35] type 00 class 0x0c0300
[ 0.118915] pci 0000:00:1d.1: reg 20: [io 0xe400-0xe41f]
[ 0.118952] pci 0000:00:1d.2: [8086:3a36] type 00 class 0x0c0300
[ 0.118983] pci 0000:00:1d.2: reg 20: [io 0xe500-0xe51f]
[ 0.119023] pci 0000:00:1d.7: [8086:3a3a] type 00 class 0x0c0320
[ 0.119035] pci 0000:00:1d.7: reg 10: [mem 0xe8404000-0xe84043ff]
[ 0.119098] pci 0000:00:1e.0: [8086:244e] type 01 class 0x060401
[ 0.119143] pci 0000:00:1f.0: [8086:3a16] type 00 class 0x060100
[ 0.119206] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 1 PIO at 0800 (mask 000f)
[ 0.119208] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 2 PIO at 0290 (mask 000f)
[ 0.119210] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 3 PIO at 4700 (mask 000b)
[ 0.119247] pci 0000:00:1f.2: [8086:3a22] type 00 class 0x010601
[ 0.119259] pci 0000:00:1f.2: reg 10: [io 0xe600-0xe607]
[ 0.119265] pci 0000:00:1f.2: reg 14: [io 0xe700-0xe703]
[ 0.119270] pci 0000:00:1f.2: reg 18: [io 0xe800-0xe807]
[ 0.119276] pci 0000:00:1f.2: reg 1c: [io 0xe900-0xe903]
[ 0.119281] pci 0000:00:1f.2: reg 20: [io 0xea00-0xea1f]
[ 0.119286] pci 0000:00:1f.2: reg 24: [mem 0xe8406000-0xe84067ff]
[ 0.119318] pci 0000:00:1f.2: PME# supported from D3hot
[ 0.119331] pci 0000:00:1f.3: [8086:3a30] type 00 class 0x0c0500
[ 0.119341] pci 0000:00:1f.3: reg 10: [mem 0xe8407000-0xe84070ff 64bit]
[ 0.119355] pci 0000:00:1f.3: reg 20: [io 0x0500-0x051f]
[ 0.119394] pci 0000:01:00.0: [1002:679a] type 00 class 0x030000
[ 0.119403] pci 0000:01:00.0: reg 10: [mem 0xd0000000-0xdfffffff 64bit pref]
[ 0.119410] pci 0000:01:00.0: reg 18: [mem 0xe5000000-0xe503ffff 64bit]
[ 0.119415] pci 0000:01:00.0: reg 20: [io 0xa000-0xa0ff]
[ 0.119424] pci 0000:01:00.0: reg 30: [mem 0x00000000-0x0001ffff pref]
[ 0.119450] pci 0000:01:00.0: supports D1 D2
[ 0.119451] pci 0000:01:00.0: PME# supported from D1 D2 D3hot
[ 0.119471] pci 0000:01:00.1: [1002:aaa0] type 00 class 0x040300
[ 0.119479] pci 0000:01:00.1: reg 10: [mem 0xe5040000-0xe5043fff 64bit]
[ 0.119523] pci 0000:01:00.1: supports D1 D2
[ 0.119544] pci 0000:00:01.0: PCI bridge to [bus 01]
[ 0.119546] pci 0000:00:01.0: bridge window [io 0xa000-0xafff]
[ 0.119548] pci 0000:00:01.0: bridge window [mem 0xe4000000-0xe5ffffff]
[ 0.119551] pci 0000:00:01.0: bridge window [mem 0xd0000000-0xdfffffff 64bit pref]
[ 0.119577] pci 0000:00:1c.0: PCI bridge to [bus 02]
[ 0.119624] pci 0000:03:00.0: [197b:2363] type 00 class 0x010601
[ 0.119698] pci 0000:03:00.0: reg 24: [mem 0xe8100000-0xe8101fff]
[ 0.119751] pci 0000:03:00.0: PME# supported from D3hot
[ 0.119777] pci 0000:03:00.1: [197b:2363] type 00 class 0x010185
[ 0.119797] pci 0000:03:00.1: reg 10: [io 0xb000-0xb007]
[ 0.119808] pci 0000:03:00.1: reg 14: [io 0xb100-0xb103]
[ 0.119819] pci 0000:03:00.1: reg 18: [io 0xb200-0xb207]
[ 0.119830] pci 0000:03:00.1: reg 1c: [io 0xb300-0xb303]
[ 0.119841] pci 0000:03:00.1: reg 20: [io 0xb400-0xb40f]
[ 0.119912] pci 0000:03:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force'
[ 0.119919] pci 0000:00:1c.3: PCI bridge to [bus 03]
[ 0.119921] pci 0000:00:1c.3: bridge window [io 0xb000-0xbfff]
[ 0.119924] pci 0000:00:1c.3: bridge window [mem 0xe8100000-0xe81fffff]
[ 0.119968] pci 0000:04:00.0: [10ec:8168] type 00 class 0x020000
[ 0.119981] pci 0000:04:00.0: reg 10: [io 0xc000-0xc0ff]
[ 0.120008] pci 0000:04:00.0: reg 18: [mem 0xe8010000-0xe8010fff 64bit pref]
[ 0.120023] pci 0000:04:00.0: reg 20: [mem 0xe8000000-0xe800ffff 64bit pref]
[ 0.120032] pci 0000:04:00.0: reg 30: [mem 0x00000000-0x0000ffff pref]
[ 0.120085] pci 0000:04:00.0: supports D1 D2
[ 0.120086] pci 0000:04:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.128011] pci 0000:00:1c.4: PCI bridge to [bus 04]
[ 0.128014] pci 0000:00:1c.4: bridge window [io 0xc000-0xcfff]
[ 0.128016] pci 0000:00:1c.4: bridge window [mem 0xe6000000-0xe6ffffff]
[ 0.128020] pci 0000:00:1c.4: bridge window [mem 0xe8000000-0xe80fffff 64bit pref]
[ 0.128062] pci 0000:05:00.0: [10ec:8168] type 00 class 0x020000
[ 0.128075] pci 0000:05:00.0: reg 10: [io 0xd000-0xd0ff]
[ 0.128097] pci 0000:05:00.0: reg 18: [mem 0xe8210000-0xe8210fff 64bit pref]
[ 0.128112] pci 0000:05:00.0: reg 20: [mem 0xe8200000-0xe820ffff 64bit pref]
[ 0.128121] pci 0000:05:00.0: reg 30: [mem 0x00000000-0x0000ffff pref]
[ 0.128174] pci 0000:05:00.0: supports D1 D2
[ 0.128175] pci 0000:05:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.136010] pci 0000:00:1c.5: PCI bridge to [bus 05]
[ 0.136013] pci 0000:00:1c.5: bridge window [io 0xd000-0xdfff]
[ 0.136015] pci 0000:00:1c.5: bridge window [mem 0xe7000000-0xe7ffffff]
[ 0.136019] pci 0000:00:1c.5: bridge window [mem 0xe8200000-0xe82fffff 64bit pref]
[ 0.136048] pci 0000:06:07.0: [104c:8024] type 00 class 0x0c0010
[ 0.136061] pci 0000:06:07.0: reg 10: [mem 0xe8304000-0xe83047ff]
[ 0.136069] pci 0000:06:07.0: reg 14: [mem 0xe8300000-0xe8303fff]
[ 0.136122] pci 0000:06:07.0: supports D1 D2
[ 0.136124] pci 0000:06:07.0: PME# supported from D0 D1 D2 D3hot
[ 0.136153] pci 0000:00:1e.0: PCI bridge to [bus 06] (subtractive decode)
[ 0.136157] pci 0000:00:1e.0: bridge window [mem 0xe8300000-0xe83fffff]
[ 0.136161] pci 0000:00:1e.0: bridge window [io 0x0000-0x0cf7] (subtractive decode)
[ 0.136162] pci 0000:00:1e.0: bridge window [io 0x0d00-0xffff] (subtractive decode)
[ 0.136164] pci 0000:00:1e.0: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
[ 0.136165] pci 0000:00:1e.0: bridge window [mem 0x000c0000-0x000dffff] (subtractive decode)
[ 0.136166] pci 0000:00:1e.0: bridge window [mem 0xfed40000-0xfed44fff] (subtractive decode)
[ 0.136168] pci 0000:00:1e.0: bridge window [mem 0xcff00000-0xfebfffff] (subtractive decode)
[ 0.136187] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX0._PRT]
[ 0.136207] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX3._PRT]
[ 0.136227] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX4._PRT]
[ 0.136242] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX5._PRT]
[ 0.136256] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.HUB0._PRT]
[ 0.136301] pci0000:00: ACPI _OSC support notification failed, disabling PCIe ASPM
[ 0.136303] pci0000:00: Unable to request _OSC control (_OSC support mask: 0x08)
[ 0.136913] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 9 10 11 12 14 *15)
[ 0.136939] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 9 *10 11 12 14 15)
[ 0.136964] ACPI: PCI Interrupt Link [LNKC] (IRQs *3 4 5 6 7 9 10 11 12 14 15)
[ 0.136990] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 9 10 *11 12 14 15)
[ 0.137016] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled.
[ 0.137041] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 *9 10 11 12 14 15)
[ 0.137066] ACPI: PCI Interrupt Link [LNK0] (IRQs 3 4 5 6 7 9 10 11 12 *14 15)
[ 0.137090] ACPI: PCI Interrupt Link [LNK1] (IRQs 3 4 *5 6 7 9 10 11 12 14 15)
[ 0.137138] vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none
[ 0.137138] vgaarb: loaded
[ 0.137138] vgaarb: bridge control possible 0000:01:00.0
[ 0.137138] SCSI subsystem initialized
[ 0.137138] ACPI: bus type scsi registered
[ 0.137138] libata version 3.00 loaded.
[ 0.137138] ACPI: bus type usb registered
[ 0.137138] usbcore: registered new interface driver usbfs
[ 0.137138] usbcore: registered new interface driver hub
[ 0.137138] usbcore: registered new device driver usb
[ 0.137138] PCI: Using ACPI for IRQ routing
[ 0.137138] PCI: pci_cache_line_size set to 64 bytes
[ 0.137138] e820: reserve RAM buffer [mem 0x0009e800-0x0009ffff]
[ 0.137138] e820: reserve RAM buffer [mem 0xcfeb0000-0xcfffffff]
[ 0.137138] NetLabel: Initializing
[ 0.137138] NetLabel: domain hash size = 128
[ 0.137138] NetLabel: protocols = UNLABELED CIPSOv4
[ 0.137138] NetLabel: unlabeled traffic allowed by default
[ 0.137138] HPET: 4 timers in total, 0 timers will be used for per-cpu timer
[ 0.137138] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0
[ 0.137138] hpet0: 4 comparators, 64-bit 14.318180 MHz counter
[ 0.140013] Switching to clocksource hpet
[ 0.143844] AppArmor: AppArmor Filesystem Enabled
[ 0.143860] pnp: PnP ACPI init
[ 0.143869] ACPI: bus type pnp registered
[ 0.143965] system 00:00: [io 0x04d0-0x04d1] has been reserved
[ 0.143966] system 00:00: [io 0x0290-0x029f] has been reserved
[ 0.143968] system 00:00: [io 0x0800-0x0805] has been reserved
[ 0.143970] system 00:00: [io 0x0290-0x0294] has been reserved
[ 0.143972] system 00:00: [io 0x0880-0x088f] has been reserved
[ 0.143975] system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.143982] pnp 00:01: [dma 4]
[ 0.143993] pnp 00:01: Plug and Play ACPI device, IDs PNP0200 (active)
[ 0.144046] pnp 00:02: Plug and Play ACPI device, IDs PNP0103 (active)
[ 0.144070] pnp 00:03: Plug and Play ACPI device, IDs PNP0b00 (active)
[ 0.144085] pnp 00:04: Plug and Play ACPI device, IDs PNP0800 (active)
[ 0.144104] pnp 00:05: Plug and Play ACPI device, IDs PNP0c04 (active)
[ 0.144266] pnp 00:06: Plug and Play ACPI device, IDs PNP0501 (active)
[ 0.144422] pnp 00:07: [dma 3]
[ 0.144448] pnp 00:07: Plug and Play ACPI device, IDs PNP0401 (active)
[ 0.144502] system 00:08: [io 0x0400-0x04cf] has been reserved
[ 0.144506] system 00:08: [io 0x04d2-0x04ff] has been reserved
[ 0.144508] system 00:08: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.144624] system 00:09: [mem 0xe0000000-0xe3ffffff] has been reserved
[ 0.144626] system 00:09: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.144730] system 00:0a: [mem 0x000d5000-0x000d7fff] has been reserved
[ 0.144732] system 00:0a: [mem 0x000f0000-0x000f7fff] could not be reserved
[ 0.144733] system 00:0a: [mem 0x000f8000-0x000fbfff] could not be reserved
[ 0.144735] system 00:0a: [mem 0x000fc000-0x000fffff] could not be reserved
[ 0.144737] system 00:0a: [mem 0xcfeb0000-0xcfefffff] could not be reserved
[ 0.144738] system 00:0a: [mem 0x00000000-0x0009ffff] could not be reserved
[ 0.144740] system 00:0a: [mem 0x00100000-0xcfeaffff] could not be reserved
[ 0.144741] system 00:0a: [mem 0xfec00000-0xfec00fff] could not be reserved
[ 0.144743] system 00:0a: [mem 0xfed10000-0xfed1dfff] has been reserved
[ 0.144744] system 00:0a: [mem 0xfed20000-0xfed8ffff] could not be reserved
[ 0.144746] system 00:0a: [mem 0xfee00000-0xfee00fff] has been reserved
[ 0.144747] system 00:0a: [mem 0xffb00000-0xffb7ffff] has been reserved
[ 0.144749] system 00:0a: [mem 0xfff00000-0xffffffff] has been reserved
[ 0.144750] system 00:0a: [mem 0x000e0000-0x000effff] has been reserved
[ 0.144752] system 00:0a: Plug and Play ACPI device, IDs PNP0c01 (active)
[ 0.144774] pnp 00:0b: Plug and Play ACPI device, IDs INT0800 (active)
[ 0.144777] pnp: PnP ACPI: found 12 devices
[ 0.144778] ACPI: ACPI bus type pnp unregistered
[ 0.150717] pci 0000:00:1c.0: bridge window [io 0x1000-0x0fff] to [bus 02] add_size 1000
[ 0.150720] pci 0000:00:1c.0: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 02] add_size 200000
[ 0.150722] pci 0000:00:1c.0: bridge window [mem 0x00100000-0x000fffff] to [bus 02] add_size 200000
[ 0.150727] pci 0000:00:1c.3: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 03] add_size 200000
[ 0.150743] pci 0000:00:1c.0: res[14]=[mem 0x00100000-0x000fffff] get_res_add_size add_size 200000
[ 0.150745] pci 0000:00:1c.0: res[15]=[mem 0x00100000-0x000fffff 64bit pref] get_res_add_size add_size 200000
[ 0.150746] pci 0000:00:1c.3: res[15]=[mem 0x00100000-0x000fffff 64bit pref] get_res_add_size add_size 200000
[ 0.150748] pci 0000:00:1c.0: res[13]=[io 0x1000-0x0fff] get_res_add_size add_size 1000
[ 0.150751] pci 0000:00:1c.0: BAR 14: assigned [mem 0xe8500000-0xe86fffff]
[ 0.150753] pci 0000:00:1c.0: BAR 15: assigned [mem 0xe8700000-0xe88fffff 64bit pref]
[ 0.150756] pci 0000:00:1c.3: BAR 15: assigned [mem 0xe8900000-0xe8afffff 64bit pref]
[ 0.150757] pci 0000:00:1c.0: BAR 13: assigned [io 0x1000-0x1fff]
[ 0.150759] pci 0000:01:00.0: BAR 6: assigned [mem 0xe4000000-0xe401ffff pref]
[ 0.150761] pci 0000:00:01.0: PCI bridge to [bus 01]
[ 0.150763] pci 0000:00:01.0: bridge window [io 0xa000-0xafff]
[ 0.150765] pci 0000:00:01.0: bridge window [mem 0xe4000000-0xe5ffffff]
[ 0.150767] pci 0000:00:01.0: bridge window [mem 0xd0000000-0xdfffffff 64bit pref]
[ 0.150769] pci 0000:00:1c.0: PCI bridge to [bus 02]
[ 0.150771] pci 0000:00:1c.0: bridge window [io 0x1000-0x1fff]
[ 0.150774] pci 0000:00:1c.0: bridge window [mem 0xe8500000-0xe86fffff]
[ 0.150777] pci 0000:00:1c.0: bridge window [mem 0xe8700000-0xe88fffff 64bit pref]
[ 0.150781] pci 0000:00:1c.3: PCI bridge to [bus 03]
[ 0.150782] pci 0000:00:1c.3: bridge window [io 0xb000-0xbfff]
[ 0.150785] pci 0000:00:1c.3: bridge window [mem 0xe8100000-0xe81fffff]
[ 0.150788] pci 0000:00:1c.3: bridge window [mem 0xe8900000-0xe8afffff 64bit pref]
[ 0.150792] pci 0000:04:00.0: BAR 6: assigned [mem 0xe8020000-0xe802ffff pref]
[ 0.150793] pci 0000:00:1c.4: PCI bridge to [bus 04]
[ 0.150795] pci 0000:00:1c.4: bridge window [io 0xc000-0xcfff]
[ 0.150798] pci 0000:00:1c.4: bridge window [mem 0xe6000000-0xe6ffffff]
[ 0.150801] pci 0000:00:1c.4: bridge window [mem 0xe8000000-0xe80fffff 64bit pref]
[ 0.150805] pci 0000:05:00.0: BAR 6: assigned [mem 0xe8220000-0xe822ffff pref]
[ 0.150806] pci 0000:00:1c.5: PCI bridge to [bus 05]
[ 0.150808] pci 0000:00:1c.5: bridge window [io 0xd000-0xdfff]
[ 0.150811] pci 0000:00:1c.5: bridge window [mem 0xe7000000-0xe7ffffff]
[ 0.150814] pci 0000:00:1c.5: bridge window [mem 0xe8200000-0xe82fffff 64bit pref]
[ 0.150818] pci 0000:00:1e.0: PCI bridge to [bus 06]
[ 0.150821] pci 0000:00:1e.0: bridge window [mem 0xe8300000-0xe83fffff]
[ 0.150847] pci 0000:00:1e.0: setting latency timer to 64
[ 0.150850] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7]
[ 0.150851] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff]
[ 0.150853] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
[ 0.150854] pci_bus 0000:00: resource 7 [mem 0x000c0000-0x000dffff]
[ 0.150855] pci_bus 0000:00: resource 8 [mem 0xfed40000-0xfed44fff]
[ 0.150856] pci_bus 0000:00: resource 9 [mem 0xcff00000-0xfebfffff]
[ 0.150858] pci_bus 0000:01: resource 0 [io 0xa000-0xafff]
[ 0.150859] pci_bus 0000:01: resource 1 [mem 0xe4000000-0xe5ffffff]
[ 0.150860] pci_bus 0000:01: resource 2 [mem 0xd0000000-0xdfffffff 64bit pref]
[ 0.150862] pci_bus 0000:02: resource 0 [io 0x1000-0x1fff]
[ 0.150863] pci_bus 0000:02: resource 1 [mem 0xe8500000-0xe86fffff]
[ 0.150864] pci_bus 0000:02: resource 2 [mem 0xe8700000-0xe88fffff 64bit pref]
[ 0.150866] pci_bus 0000:03: resource 0 [io 0xb000-0xbfff]
[ 0.150867] pci_bus 0000:03: resource 1 [mem 0xe8100000-0xe81fffff]
[ 0.150868] pci_bus 0000:03: resource 2 [mem 0xe8900000-0xe8afffff 64bit pref]
[ 0.150870] pci_bus 0000:04: resource 0 [io 0xc000-0xcfff]
[ 0.150871] pci_bus 0000:04: resource 1 [mem 0xe6000000-0xe6ffffff]
[ 0.150872] pci_bus 0000:04: resource 2 [mem 0xe8000000-0xe80fffff 64bit pref]
[ 0.150874] pci_bus 0000:05: resource 0 [io 0xd000-0xdfff]
[ 0.150875] pci_bus 0000:05: resource 1 [mem 0xe7000000-0xe7ffffff]
[ 0.150876] pci_bus 0000:05: resource 2 [mem 0xe8200000-0xe82fffff 64bit pref]
[ 0.150878] pci_bus 0000:06: resource 1 [mem 0xe8300000-0xe83fffff]
[ 0.150879] pci_bus 0000:06: resource 4 [io 0x0000-0x0cf7]
[ 0.150880] pci_bus 0000:06: resource 5 [io 0x0d00-0xffff]
[ 0.150882] pci_bus 0000:06: resource 6 [mem 0x000a0000-0x000bffff]
[ 0.150883] pci_bus 0000:06: resource 7 [mem 0x000c0000-0x000dffff]
[ 0.150884] pci_bus 0000:06: resource 8 [mem 0xfed40000-0xfed44fff]
[ 0.150885] pci_bus 0000:06: resource 9 [mem 0xcff00000-0xfebfffff]
[ 0.150909] NET: Registered protocol family 2
[ 0.151035] TCP established hash table entries: 65536 (order: 8, 1048576 bytes)
[ 0.151323] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[ 0.151580] TCP: Hash tables configured (established 65536 bind 65536)
[ 0.151607] TCP: reno registered
[ 0.151615] UDP hash table entries: 4096 (order: 5, 131072 bytes)
[ 0.151654] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes)
[ 0.151719] NET: Registered protocol family 1
[ 0.184020] pci 0000:01:00.0: Boot video device
[ 0.184032] PCI: CLS 32 bytes, default 64
[ 0.184061] Trying to unpack rootfs image as initramfs...
[ 0.418178] Freeing initrd memory: 22328k freed
[ 0.423102] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[ 0.423107] software IO TLB [mem 0xcbeaa000-0xcfeaa000] (64MB) mapped at [ffff8800cbeaa000-ffff8800cfea9fff]
[ 0.423359] Initialise module verification
[ 0.423391] audit: initializing netlink socket (disabled)
[ 0.423402] type=2000 audit(1388798785.420:1): initialized
[ 0.441445] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[ 0.442638] VFS: Disk quotas dquot_6.5.2
[ 0.442664] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 0.442959] fuse init (API version 7.20)
[ 0.443011] msgmni has been set to 15963
[ 0.443361] Key type asymmetric registered
[ 0.443362] Asymmetric key parser 'x509' registered
[ 0.443384] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
[ 0.443406] io scheduler noop registered
[ 0.443407] io scheduler deadline registered (default)
[ 0.443410] io scheduler cfq registered
[ 0.443495] pcieport 0000:00:01.0: irq 40 for MSI/MSI-X
[ 0.443543] pcieport 0000:00:1c.0: irq 41 for MSI/MSI-X
[ 0.443599] pcieport 0000:00:1c.3: irq 42 for MSI/MSI-X
[ 0.443655] pcieport 0000:00:1c.4: irq 43 for MSI/MSI-X
[ 0.443712] pcieport 0000:00:1c.5: irq 44 for MSI/MSI-X
[ 0.443758] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 0.443770] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[ 0.443799] intel_idle: does not run on family 6 model 23
[ 0.443847] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0
[ 0.443851] ACPI: Power Button [PWRB]
[ 0.443881] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
[ 0.443883] ACPI: Power Button [PWRF]
[ 0.443914] tsc: Marking TSC unstable due to TSC halts in idle
[ 0.443917] ACPI: acpi_idle registered with cpuidle
[ 0.445405] GHES: HEST is not enabled!
[ 0.465775] 00:06: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 0.466566] Linux agpgart interface v0.103
[ 0.467344] brd: module loaded
[ 0.467690] loop: module loaded
[ 0.467896] libphy: Fixed MDIO Bus: probed
[ 0.467932] tun: Universal TUN/TAP device driver, 1.6
[ 0.467932] tun: (C) 1999-2004 Max Krasnyansky
[ 0.467954] PPP generic driver version 2.4.2
[ 0.467975] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 0.467976] ehci-pci: EHCI PCI platform driver
[ 0.467998] ehci-pci 0000:00:1a.7: setting latency timer to 64
[ 0.468008] ehci-pci 0000:00:1a.7: EHCI Host Controller
[ 0.468012] ehci-pci 0000:00:1a.7: new USB bus registered, assigned bus number 1
[ 0.471908] ehci-pci 0000:00:1a.7: cache line size of 32 is not supported
[ 0.471920] ehci-pci 0000:00:1a.7: irq 18, io mem 0xe8405000
[ 0.480012] ehci-pci 0000:00:1a.7: USB 2.0 started, EHCI 1.00
[ 0.480025] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[ 0.480027] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.480028] usb usb1: Product: EHCI Host Controller
[ 0.480029] usb usb1: Manufacturer: Linux 3.8.0-35-generic ehci_hcd
[ 0.480030] usb usb1: SerialNumber: 0000:00:1a.7
[ 0.480084] hub 1-0:1.0: USB hub found
[ 0.480087] hub 1-0:1.0: 6 ports detected
[ 0.480159] ehci-pci 0000:00:1d.7: setting latency timer to 64
[ 0.480161] ehci-pci 0000:00:1d.7: EHCI Host Controller
[ 0.480164] ehci-pci 0000:00:1d.7: new USB bus registered, assigned bus number 2
[ 0.484056] ehci-pci 0000:00:1d.7: cache line size of 32 is not supported
[ 0.484065] ehci-pci 0000:00:1d.7: irq 23, io mem 0xe8404000
[ 0.496009] ehci-pci 0000:00:1d.7: USB 2.0 started, EHCI 1.00
[ 0.496018] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
[ 0.496019] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.496020] usb usb2: Product: EHCI Host Controller
[ 0.496022] usb usb2: Manufacturer: Linux 3.8.0-35-generic ehci_hcd
[ 0.496023] usb usb2: SerialNumber: 0000:00:1d.7
[ 0.496072] hub 2-0:1.0: USB hub found
[ 0.496074] hub 2-0:1.0: 6 ports detected
[ 0.496135] ehci-platform: EHCI generic platform driver
[ 0.496141] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 0.496149] uhci_hcd: USB Universal Host Controller Interface driver
[ 0.496159] uhci_hcd 0000:00:1a.0: setting latency timer to 64
[ 0.496161] uhci_hcd 0000:00:1a.0: UHCI Host Controller
[ 0.496164] uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 3
[ 0.496187] uhci_hcd 0000:00:1a.0: irq 16, io base 0x0000e000
[ 0.496204] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
[ 0.496206] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.496207] usb usb3: Product: UHCI Host Controller
[ 0.496208] usb usb3: Manufacturer: Linux 3.8.0-35-generic uhci_hcd
[ 0.496210] usb usb3: SerialNumber: 0000:00:1a.0
[ 0.496255] hub 3-0:1.0: USB hub found
[ 0.496257] hub 3-0:1.0: 2 ports detected
[ 0.496300] uhci_hcd 0000:00:1a.1: setting latency timer to 64
[ 0.496302] uhci_hcd 0000:00:1a.1: UHCI Host Controller
[ 0.496305] uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 4
[ 0.496328] uhci_hcd 0000:00:1a.1: irq 21, io base 0x0000e100
[ 0.496345] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
[ 0.496346] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.496347] usb usb4: Product: UHCI Host Controller
[ 0.496349] usb usb4: Manufacturer: Linux 3.8.0-35-generic uhci_hcd
[ 0.496350] usb usb4: SerialNumber: 0000:00:1a.1
[ 0.496394] hub 4-0:1.0: USB hub found
[ 0.496396] hub 4-0:1.0: 2 ports detected
[ 0.496437] uhci_hcd 0000:00:1a.2: setting latency timer to 64
[ 0.496439] uhci_hcd 0000:00:1a.2: UHCI Host Controller
[ 0.496442] uhci_hcd 0000:00:1a.2: new USB bus registered, assigned bus number 5
[ 0.496459] uhci_hcd 0000:00:1a.2: irq 18, io base 0x0000e200
[ 0.496477] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
[ 0.496478] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.496480] usb usb5: Product: UHCI Host Controller
[ 0.496481] usb usb5: Manufacturer: Linux 3.8.0-35-generic uhci_hcd
[ 0.496482] usb usb5: SerialNumber: 0000:00:1a.2
[ 0.496525] hub 5-0:1.0: USB hub found
[ 0.496527] hub 5-0:1.0: 2 ports detected
[ 0.496569] uhci_hcd 0000:00:1d.0: setting latency timer to 64
[ 0.496571] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[ 0.496574] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 6
[ 0.496590] uhci_hcd 0000:00:1d.0: irq 23, io base 0x0000e300
[ 0.496607] usb usb6: New USB device found, idVendor=1d6b, idProduct=0001
[ 0.496609] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.496610] usb usb6: Product: UHCI Host Controller
[ 0.496611] usb usb6: Manufacturer: Linux 3.8.0-35-generic uhci_hcd
[ 0.496613] usb usb6: SerialNumber: 0000:00:1d.0
[ 0.496655] hub 6-0:1.0: USB hub found
[ 0.496657] hub 6-0:1.0: 2 ports detected
[ 0.496701] uhci_hcd 0000:00:1d.1: setting latency timer to 64
[ 0.496703] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[ 0.496706] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 7
[ 0.496728] uhci_hcd 0000:00:1d.1: irq 19, io base 0x0000e400
[ 0.496746] usb usb7: New USB device found, idVendor=1d6b, idProduct=0001
[ 0.496748] usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.496749] usb usb7: Product: UHCI Host Controller
[ 0.496750] usb usb7: Manufacturer: Linux 3.8.0-35-generic uhci_hcd
[ 0.496752] usb usb7: SerialNumber: 0000:00:1d.1
[ 0.496794] hub 7-0:1.0: USB hub found
[ 0.496797] hub 7-0:1.0: 2 ports detected
[ 0.496836] uhci_hcd 0000:00:1d.2: setting latency timer to 64
[ 0.496838] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[ 0.496843] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 8
[ 0.496859] uhci_hcd 0000:00:1d.2: irq 18, io base 0x0000e500
[ 0.496878] usb usb8: New USB device found, idVendor=1d6b, idProduct=0001
[ 0.496879] usb usb8: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.496880] usb usb8: Product: UHCI Host Controller
[ 0.496882] usb usb8: Manufacturer: Linux 3.8.0-35-generic uhci_hcd
[ 0.496883] usb usb8: SerialNumber: 0000:00:1d.2
[ 0.496926] hub 8-0:1.0: USB hub found
[ 0.496931] hub 8-0:1.0: 2 ports detected
[ 0.496995] i8042: PNP: No PS/2 controller found. Probing ports directly.
[ 0.497330] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 0.497334] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 0.497397] mousedev: PS/2 mouse device common for all mice
[ 0.497467] rtc_cmos 00:03: RTC can wake from S4
[ 0.497544] rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0
[ 0.497562] rtc0: alarms up to one month, 242 bytes nvram, hpet irqs
[ 0.497613] device-mapper: uevent: version 1.0.3
[ 0.497645] device-mapper: ioctl: 4.23.1-ioctl (2012-12-18) initialised: dm-devel@redhat.com
[ 0.497669] cpuidle: using governor ladder
[ 0.497698] cpuidle: using governor menu
[ 0.497701] ledtrig-cpu: registered to indicate activity on CPUs
[ 0.497702] EFI Variables Facility v0.08 2004-May-17
[ 0.497800] ashmem: initialized
[ 0.497868] TCP: cubic registered
[ 0.497926] NET: Registered protocol family 10
[ 0.498025] NET: Registered protocol family 17
[ 0.498032] Key type dns_resolver registered
[ 0.498163] Loading module verification certificates
[ 0.498774] MODSIGN: Loaded cert 'Magrathea: Glacier signing key: 26d22696497e0146aec821b3bfa3dd9972acd4d9'
[ 0.498782] registered taskstats version 1
[ 0.500351] Key type trusted registered
[ 0.501573] Key type encrypted registered
[ 0.502860] rtc_cmos 00:03: setting system clock to 2014-01-04 01:26:26 UTC (1388798786)
[ 0.502899] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[ 0.502900] EDD information not available.
[ 0.503929] Freeing unused kernel memory: 1016k freed
[ 0.504097] Write protecting the kernel read-only data: 12288k
[ 0.505985] Freeing unused kernel memory: 1004k freed
[ 0.507859] Freeing unused kernel memory: 952k freed
[ 0.517709] udevd[108]: starting version 175
[ 0.534558] Disabling lock debugging due to kernel taint
[ 0.534812] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
[ 0.534990] r8169 0000:04:00.0: irq 45 for MSI/MSI-X
[ 0.535067] ahci 0000:00:1f.2: version 3.0
[ 0.535099] ahci 0000:00:1f.2: irq 46 for MSI/MSI-X
[ 0.535113] r8169 0000:04:00.0 eth0: RTL8168c/8111c at 0xffffc90000c1c000, 00:24:1d:da:44:0f, XID 1c4000c0 IRQ 45
[ 0.535115] r8169 0000:04:00.0 eth0: jumbo features [frames: 6128 bytes, tx checksumming: ko]
[ 0.535139] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
[ 0.535141] ahci: SSS flag set, parallel bus scan disabled
[ 0.535174] ahci 0000:00:1f.2: AHCI 0001.0200 32 slots 6 ports 3 Gbps 0x3f impl SATA mode
[ 0.535176] ahci 0000:00:1f.2: flags: 64bit ncq sntf stag pm led clo pmp pio slum part ccc ems
[ 0.535179] ahci 0000:00:1f.2: setting latency timer to 64
[ 0.535304] r8169 0000:05:00.0: irq 47 for MSI/MSI-X
[ 0.535384] r8169 0000:05:00.0 eth1: RTL8168c/8111c at 0xffffc90000c6c000, 00:1f:d0:81:f5:7c, XID 1c4000c0 IRQ 47
[ 0.535386] r8169 0000:05:00.0 eth1: jumbo features [frames: 6128 bytes, tx checksumming: ko]
[ 0.539395] pata_jmicron 0000:03:00.1: setting latency timer to 64
[ 0.542240] scsi0 : pata_jmicron
[ 0.542879] scsi1 : pata_jmicron
[ 0.543003] ata1: PATA max UDMA/100 cmd 0xb000 ctl 0xb100 bmdma 0xb400 irq 16
[ 0.543005] ata2: PATA max UDMA/100 cmd 0xb200 ctl 0xb300 bmdma 0xb408 irq 16
[ 0.572298] scsi2 : ahci
[ 0.572358] scsi3 : ahci
[ 0.572429] scsi4 : ahci
[ 0.572478] scsi5 : ahci
[ 0.572523] scsi6 : ahci
[ 0.572567] scsi7 : ahci
[ 0.572612] ata3: SATA max UDMA/133 abar m2048@0xe8406000 port 0xe8406100 irq 46
[ 0.572614] ata4: SATA max UDMA/133 abar m2048@0xe8406000 port 0xe8406180 irq 46
[ 0.572615] ata5: SATA max UDMA/133 abar m2048@0xe8406000 port 0xe8406200 irq 46
[ 0.572617] ata6: SATA max UDMA/133 abar m2048@0xe8406000 port 0xe8406280 irq 46
[ 0.572618] ata7: SATA max UDMA/133 abar m2048@0xe8406000 port 0xe8406300 irq 46
[ 0.572620] ata8: SATA max UDMA/133 abar m2048@0xe8406000 port 0xe8406380 irq 46
[ 0.588034] ahci 0000:03:00.0: AHCI 0001.0000 32 slots 2 ports 3 Gbps 0x3 impl SATA mode
[ 0.588036] ahci 0000:03:00.0: flags: 64bit ncq pm led clo pmp pio slum part
[ 0.588225] scsi8 : ahci
[ 0.588272] scsi9 : ahci
[ 0.588302] ata9: SATA max UDMA/133 abar m8192@0xe8100000 port 0xe8100100 irq 19
[ 0.588304] ata10: SATA max UDMA/133 abar m8192@0xe8100000 port 0xe8100180 irq 19
[ 0.616046] firewire_ohci 0000:06:07.0: added OHCI v1.10 device as card 0, 4 IR + 8 IT contexts, quirks 0x2
[ 0.908033] ata10: SATA link down (SStatus 0 SControl 300)
[ 0.908061] ata9: SATA link down (SStatus 0 SControl 300)
[ 1.052012] usb 1-6: new high-speed USB device number 3 using ehci-pci
[ 1.064013] ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 1.075494] ata3.00: ATA-8: MKNSSDCR120GB-DX, 332ABBF0, max UDMA/133
[ 1.075496] ata3.00: 234441648 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
[ 1.085876] ata3.00: configured for UDMA/133
[ 1.085948] scsi 2:0:0:0: Direct-Access ATA MKNSSDCR120GB-DX 332A PQ: 0 ANSI: 5
[ 1.086049] sd 2:0:0:0: Attached scsi generic sg0 type 0
[ 1.086057] sd 2:0:0:0: [sda] 234441648 512-byte logical blocks: (120 GB/111 GiB)
[ 1.086117] sd 2:0:0:0: [sda] Write Protect is off
[ 1.086119] sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 1.086141] sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 1.086924] sda: sda1 sda2 < sda5 sda6 >
[ 1.087180] sd 2:0:0:0: [sda] Attached SCSI disk
[ 1.116059] firewire_core 0000:06:07.0: created device fw0: GUID 00e1e3b30000241d, S400
[ 1.184341] usb 1-6: New USB device found, idVendor=0424, idProduct=2514
[ 1.184343] usb 1-6: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 1.184507] hub 1-6:1.0: USB hub found
[ 1.184587] hub 1-6:1.0: 3 ports detected
[ 1.404014] ata4: SATA link down (SStatus 0 SControl 300)
[ 1.424010] usb 5-1: new full-speed USB device number 2 using uhci_hcd
[ 1.595483] usb 5-1: New USB device found, idVendor=e0ff, idProduct=0005
[ 1.595484] usb 5-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 1.595486] usb 5-1: Product: USB Device
[ 1.595487] usb 5-1: Manufacturer: Areson
[ 1.604526] usbcore: registered new interface driver usbhid
[ 1.604528] usbhid: USB HID core driver
[ 1.605661] input: Areson USB Device as /devices/pci0000:00/0000:00:1a.2/usb5/5-1/5-1:1.0/input/input2
[ 1.605749] hid-generic 0003:E0FF:0005.0001: input,hidraw0: USB HID v1.00 Mouse [Areson USB Device] on usb-0000:00:1a.2-1/input0
[ 1.608552] input: Areson USB Device as /devices/pci0000:00/0000:00:1a.2/usb5/5-1/5-1:1.1/input/input3
[ 1.608843] hid-generic 0003:E0FF:0005.0002: input,hiddev0,hidraw1: USB HID v1.00 Keyboard [Areson USB Device] on usb-0000:00:1a.2-1/input1
[ 1.796087] usb 1-6.3: new full-speed USB device number 4 using ehci-pci
[ 1.895842] usb 1-6.3: New USB device found, idVendor=060b, idProduct=6231
[ 1.895844] usb 1-6.3: New USB device strings: Mfr=0, Product=1, SerialNumber=0
[ 1.895845] usb 1-6.3: Product: Tt eSPORTS MEKA mechanical keyboard
[ 1.896019] ata5: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 1.898363] input: Tt eSPORTS MEKA mechanical keyboard as /devices/pci0000:00/0000:00:1a.7/usb1/1-6/1-6.3/1-6.3:1.0/input/input4
[ 1.898456] hid-generic 0003:060B:6231.0003: input,hidraw2: USB HID v1.11 Keyboard [Tt eSPORTS MEKA mechanical keyboard] on usb-0000:00:1a.7-6.3/input0
[ 1.899004] ata5.00: ATAPI: HL-DT-ST BD-RE WH14NS40, 1.01, max UDMA/100
[ 1.899733] ata5.00: configured for UDMA/100
[ 1.900226] scsi 4:0:0:0: CD-ROM HL-DT-ST BD-RE WH14NS40 1.01 PQ: 0 ANSI: 5
[ 1.901135] input: Tt eSPORTS MEKA mechanical keyboard as /devices/pci0000:00/0000:00:1a.7/usb1/1-6/1-6.3/1-6.3:1.1/input/input5
[ 1.901192] hid-generic 0003:060B:6231.0004: input,hidraw3: USB HID v1.11 Device [Tt eSPORTS MEKA mechanical keyboard] on usb-0000:00:1a.7-6.3/input1
[ 1.905417] sr0: scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray
[ 1.905419] cdrom: Uniform CD-ROM driver Revision: 3.20
[ 1.905484] sr 4:0:0:0: Attached scsi CD-ROM sr0
[ 1.905534] sr 4:0:0:0: Attached scsi generic sg1 type 5
[ 2.396012] ata6: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 2.396479] ata6.00: ATA-8: WDC WD1000DHTZ-04N21V0, 04.06A00, max UDMA/133
[ 2.396481] ata6.00: 1953525168 sectors, multi 0: LBA48 NCQ (depth 31/32), AA
[ 2.397878] ata6.00: configured for UDMA/133
[ 2.397929] scsi 5:0:0:0: Direct-Access ATA WDC WD1000DHTZ-0 04.0 PQ: 0 ANSI: 5
[ 2.397995] sd 5:0:0:0: [sdb] 1953525168 512-byte logical blocks: (1.00 TB/931 GiB)
[ 2.397996] sd 5:0:0:0: [sdb] 4096-byte physical blocks
[ 2.398006] sd 5:0:0:0: Attached scsi generic sg2 type 0
[ 2.398024] sd 5:0:0:0: [sdb] Write Protect is off
[ 2.398026] sd 5:0:0:0: [sdb] Mode Sense: 00 3a 00 00
[ 2.398054] sd 5:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 2.404188] sdb: sdb1 sdb2 sdb3
[ 2.404387] sd 5:0:0:0: [sdb] Attached SCSI disk
[ 2.888013] ata7: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 2.899660] ata7.00: ATA-8: MKNSSDCR120GB-DX, 332ABBF0, max UDMA/133
[ 2.899662] ata7.00: 234441648 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
[ 2.909881] ata7.00: configured for UDMA/133
[ 2.909926] scsi 6:0:0:0: Direct-Access ATA MKNSSDCR120GB-DX 332A PQ: 0 ANSI: 5
[ 2.909988] sd 6:0:0:0: [sdc] 234441648 512-byte logical blocks: (120 GB/111 GiB)
[ 2.910000] sd 6:0:0:0: Attached scsi generic sg3 type 0
[ 2.910027] sd 6:0:0:0: [sdc] Write Protect is off
[ 2.910028] sd 6:0:0:0: [sdc] Mode Sense: 00 3a 00 00
[ 2.910044] sd 6:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 2.910429] sdc: sdc1
[ 2.910583] sd 6:0:0:0: [sdc] Attached SCSI disk
[ 3.228013] ata8: SATA link down (SStatus 0 SControl 300)
[ 9.878115] EXT4-fs (sda5): mounted filesystem with ordered data mode. Opts: (null)
[ 9.960452] init: ureadahead main process (356) terminated with status 5
[ 10.014175] EXT4-fs (sda5): re-mounted. Opts: discard,errors=remount-ro
[ 10.035502] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 10.035507] IPv6: ADDRCONF(NETDEV_UP): eth1: link is not ready
[ 10.047411] udevd[454]: starting version 175
[ 10.075896] lp: driver loaded but no devices found
[ 10.118579] AMD IOMMUv2 driver by Joerg Roedel
[ 10.118582] AMD IOMMUv2 functionality not available on this system
[ 10.147880] ppdev: user-space parallel port driver
[ 10.149907] parport_pc 00:07: reported by Plug and Play ACPI
[ 10.149960] parport0: PC-style at 0x378 (0x778), irq 7 [PCSPP,TRISTATE]
[ 10.174624] Bluetooth: Core ver 2.16
[ 10.174638] NET: Registered protocol family 31
[ 10.174639] Bluetooth: HCI device and connection manager initialized
[ 10.174646] Bluetooth: HCI socket layer initialized
[ 10.174648] Bluetooth: L2CAP socket layer initialized
[ 10.174651] Bluetooth: SCO socket layer initialized
[ 10.175090] ACPI Warning: 0x0000000000000428-0x000000000000042f SystemIO conflicts with Region \GP2C 1 (20121018/utaddress-251)
[ 10.175095] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 10.175115] lpc_ich: Resource conflict(s) found affecting gpio_ich
[ 10.184479] snd_hda_intel 0000:00:1b.0: irq 48 for MSI/MSI-X
[ 10.184777] Bluetooth: RFCOMM TTY layer initialized
[ 10.184786] Bluetooth: RFCOMM socket layer initialized
[ 10.184787] Bluetooth: RFCOMM ver 1.11
[ 10.185255] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[ 10.185258] Bluetooth: BNEP filters: protocol multicast
[ 10.185266] Bluetooth: BNEP socket layer initialized
[ 10.197088] type=1400 audit(1388798796.191:2): apparmor="STATUS" operation="profile_load" name="/sbin/dhclient" pid=787 comm="apparmor_parser"
[ 10.197302] type=1400 audit(1388798796.191:3): apparmor="STATUS" operation="profile_load" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=787 comm="apparmor_parser"
[ 10.197424] type=1400 audit(1388798796.191:4): apparmor="STATUS" operation="profile_load" name="/usr/lib/connman/scripts/dhclient-script" pid=787 comm="apparmor_parser"
[ 10.197743] type=1400 audit(1388798796.191:5): apparmor="STATUS" operation="profile_replace" name="/sbin/dhclient" pid=786 comm="apparmor_parser"
[ 10.197958] type=1400 audit(1388798796.191:6): apparmor="STATUS" operation="profile_replace" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=786 comm="apparmor_parser"
[ 10.198083] type=1400 audit(1388798796.191:7): apparmor="STATUS" operation="profile_replace" name="/usr/lib/connman/scripts/dhclient-script" pid=786 comm="apparmor_parser"
[ 10.198482] microcode: CPU0 sig=0x1067a, pf=0x10, revision=0xa07
[ 10.202590] fglrx: module license 'Proprietary. (C) 2002 - ATI Technologies, Starnberg, GERMANY' taints kernel.
[ 10.212886] [fglrx] Maximum main memory to use for locked dma buffers: 7751 MBytes.
[ 10.213076] [fglrx] vendor: 1002 device: 679a count: 1
[ 10.213149] input: HDA Intel Line as /devices/pci0000:00/0000:00:1b.0/sound/card0/input6
[ 10.213392] [fglrx] ioport: bar 4, base 0xa000, size: 0x100
[ 10.213546] [fglrx] Kernel PAT support is enabled
[ 10.213560] [fglrx] module loaded - fglrx 13.10.10 [May 23 2013] with 1 minors
[ 10.213623] input: HDA Intel Rear Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input7
[ 10.213789] input: HDA Intel Front Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input8
[ 10.213911] input: HDA Intel Front Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input9
[ 10.214014] input: HDA Intel Line Out Side as /devices/pci0000:00/0000:00:1b.0/sound/card0/input10
[ 10.214543] input: HDA Intel Line Out CLFE as /devices/pci0000:00/0000:00:1b.0/sound/card0/input11
[ 10.214601] input: HDA Intel Line Out Surround as /devices/pci0000:00/0000:00:1b.0/sound/card0/input12
[ 10.214657] input: HDA Intel Line Out Front as /devices/pci0000:00/0000:00:1b.0/sound/card0/input13
[ 10.216271] hda-intel 0000:01:00.1: Handle VGA-switcheroo audio client
[ 10.216273] hda-intel 0000:01:00.1: Force to non-snoop mode
[ 10.216338] snd_hda_intel 0000:01:00.1: irq 49 for MSI/MSI-X
[ 10.231223] input: HDA ATI HDMI HDMI/DP,pcm=11 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input14
[ 10.231340] input: HDA ATI HDMI HDMI/DP,pcm=10 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input15
[ 10.231448] input: HDA ATI HDMI HDMI/DP,pcm=9 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input16
[ 10.231693] input: HDA ATI HDMI HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input17
[ 10.231827] input: HDA ATI HDMI HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input18
[ 10.231937] input: HDA ATI HDMI HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input19
[ 10.248131] lp0: using parport0 (interrupt-driven).
[ 10.253007] init: failsafe main process (886) killed by TERM signal
[ 10.271283] type=1400 audit(1388798796.263:8): apparmor="STATUS" operation="profile_load" name="/usr/lib/cups/backend/cups-pdf" pid=960 comm="apparmor_parser"
[ 10.271563] type=1400 audit(1388798796.263:9): apparmor="STATUS" operation="profile_load" name="/usr/sbin/cupsd" pid=960 comm="apparmor_parser"
[ 10.280191] microcode: CPU1 sig=0x1067a, pf=0x10, revision=0xa07
[ 10.285062] gpio_ich: GPIO from 195 to 255 on gpio_ich
[ 10.288611] microcode: CPU2 sig=0x1067a, pf=0x10, revision=0xa07
[ 10.289939] microcode: CPU3 sig=0x1067a, pf=0x10, revision=0xa07
[ 10.292255] microcode: Microcode Update Driver: v2.00 , Peter Oruba
[ 10.296455] type=1400 audit(1388798796.291:10): apparmor="STATUS" operation="profile_replace" name="/sbin/dhclient" pid=1038 comm="apparmor_parser"
[ 10.296674] type=1400 audit(1388798796.291:11): apparmor="STATUS" operation="profile_replace" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=1038 comm="apparmor_parser"
[ 10.397512] r8169 0000:04:00.0 eth0: link down
[ 10.397613] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 10.397790] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 10.410974] r8169 0000:05:00.0 eth1: link down
[ 10.410987] r8169 0000:05:00.0 eth1: link down
[ 10.411099] IPv6: ADDRCONF(NETDEV_UP): eth1: link is not ready
[ 10.411304] IPv6: ADDRCONF(NETDEV_UP): eth1: link is not ready
[ 10.436430] init: udev-fallback-graphics main process (1185) terminated with status 1
[ 10.479487] bio: create slab at 1
[ 10.565116] Adding 2094076k swap on /dev/mapper/cryptswap1. Priority:-1 extents:1 across:2094076k SS
[ 10.565571] fglrx_pci 0000:01:00.0: irq 50 for MSI/MSI-X
[ 10.565926] [fglrx] Firegl kernel thread PID: 1287
[ 10.566061] [fglrx] Firegl kernel thread PID: 1288
[ 10.566158] [fglrx] Firegl kernel thread PID: 1289
[ 10.566265] [fglrx] IRQ 50 Enabled
[ 10.572482] [fglrx] Reserved FB block: Shared offset:0, size:1000000
[ 10.572484] [fglrx] Reserved FB block: Unshared offset:f87c000, size:484000
[ 10.572485] [fglrx] Reserved FB block: Unshared offset:fff8000, size:8000
[ 10.572486] [fglrx] Reserved FB block: Unshared offset:bfff4000, size:c000
[ 12.438094] r8169 0000:05:00.0 eth1: link up
[ 12.438100] IPv6: ADDRCONF(NETDEV_CHANGE): eth1: link becomes ready
[ 12.988034] device eth0 entered promiscuous mode
[ 12.996605] vboxdrv: Found 4 processor cores.
[ 12.996784] vboxdrv: fAsync=0 offMin=0x5f1 offMax=0x2442
[ 12.996838] vboxdrv: TSC mode is 'synchronous', kernel timer mode is 'normal'.
[ 12.996839] vboxdrv: Successfully loaded version 4.1.12_Ubuntu (interface 0x00190000).
[ 13.003361] vboxpci: IOMMU not found (not registered)
[ 13.161552] init: plymouth-stop pre-start process (1824) terminated with status 1
[ 860.616350] audit_printk_skb: 48 callbacks suppressed
[ 860.616353] type=1400 audit(1388799646.609:28): apparmor="DENIED" operation="capable" parent=1 profile="/usr/sbin/cupsd" pid=992 comm="cupsd" pid=992 comm="cupsd" capability=36 capname="block_suspend"